Find a dealer fence calculator icon Fencing calculator Ask the fence pro download icon Download catalog

Using Gripple Joiners

Q. I recently purchased your 47" Gaucho Field Fence. What are the metal components that are pre-installed on each line of the fence? How do I use them? 

A. The metal pieces attached to the ends of the wire are called Gripple wire joiner. A Gripple wire joiner is a device used to join, splice and tension wire as well as terminate wires. They are manufactured in Sheffield, England by Gripple Ltd. The name derives from the fact the device both "grips" and "pulls" wire. Bekaert pre-installs their wire joiners on select fence products including Solidlock® Pro Fixed Knot, Solidlock® Fixed Knot, Gaucho® Pro Field Fence, and Gaucho® Field Fence

If you look at the Gripple joiner, there are two holes on each end.  The wire goes into the hole without the blue piece.  Push it through the hole.  The wire that you are splicing to then goes into the other hole.  Push both wires through the holes until the knots meet. This completes the splice. You will need to cut the Gripples off of the first roll when you start your fence.  Simply cut the wire and pull the small piece through the Gripple.  Save these for future splices and repairs.  Then you can tie off the end. 
The blue plastic piece with the wire is a Gripple release tool.  If you look at the end of the Gripple, you will see a tiny hole.  The wire goes into this hole and releases the Gripple. Again, save this for future splicing and repairs.

In addition to pre-installed Gripples, Bekaert also offers other Gripple fence solutions and accessories to assist in your fence installation. For more information on Gripple products refer to the Bekaert Fencing System Gripple brochure

In the video below #TheFencePros demonstrate the how to join two fixed knot fence rolls to each other using a Gripple Medium Plus joiner. Still need help with your fence installation? In addition to our videos, we have a knowledge library that contains detailed brace installation guides. Still have questions? Ask #TheFencePros!


4 Fence Tips

There are a lot of fencing products available. How do I know which one to buy for my needs?


I’ve seen coating information during my fencing research about fence coatings. Do I need to get a coated fence, and what are the differences between the coatings?

Fence 101

I know I need a fence, but I’m not sure how to even begin, let alone determine costs and select products. Is there a “Fencing 101” or “Fencing for Dummies” tutorial that can help? 

Fence Openings

I heard many of your woven wire fences feature gradual vertical spacing openings. How do I know what those openings are? 

Fence Knots

What are the differences between the types of knots on a fence, and which one is the right kind for my fencing project?

Fence Stapling

I’ve got wooden posts and need to staple my fencing wire to them. What’s the best way to do this so I don’t harm the fence?

Fence Tensioning

I’ve decided on a high tensile fixed knot fence for my project, and I know I need to tension it. What are the best practices for doing this safely and effectively?

Using Gripples

I recently purchased your 47" Gaucho Field Fence. What are the metal components that are pre-installed on each line of the fence? How do I use them? 

Fence Tie Off

What is the best way to tie off my high tensile fencing at the braces?

High Tensile versus Low Carbon Wire

What’s the difference between “high tensile” and “low carbon” fence? Is one a better choice than the other for my fencing project?

Pipe Bracing

My fencing project is just getting started, and I’m using some pipes create an H-brace for my corners. What do I need to know about bracing with pipe?

Post Spacing

I’ve chosen my fencing and bracing, but what’s the right space to maintain between my posts to make sure my fence stays upright and tensioned?

Starting a Fence Project

I’m starting a fencing project. Do you have any pointers on how to install fencing?

Stripping a Knot

I’m ready to tie off my high tensile wire to the braces, but I’m out of loose wire. How do I strip knots off the wire ends so I have more loose wire to tie off?

Wood Posts for Bracing

I’ve got some thick wooden posts available, and I’d like to use them as corner posts for a fencing project I’m considering. Are wood posts a good choice for bracing a fence?